Please use this identifier to cite or link to this item:
Title: An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray
Authors: Xie, K;Ma, Q;Lin, B;Jiang, Y;Gao, J;Meng, G;Liu, X
subject: Ammonia Fuel;Bace0.9Nd0.1O3-Δ;Proton Conductor;Solid Oxide Fuel Cell;Suspension Spray
Year: 2007
Publisher: Elsevier SA. The Journal's web site is located at
Description: In order to develop a cost effective route to fabricate solid oxide fuel cells (SOFC) with a proton conductive electrolyte, BaCe0.9Nd0.1O3-δ (BCNO) powder was prepared by the modified Pechini method and a suspension of BCNO powder was then deposited as a thin layer by a spray process onto a NiO-BCNO anode. A bi-layer with very dense BCNO electrolyte was obtained by co-sintering at 1400 °C for 5 h. With La0.5Sr0.5CoO3-δ (LSCO) as the cathode, single cells were assembled and tested with NH3 and H2 as fuels and static air as the oxidant. For a commercial liquid ammonia fuel at 700 °C, the OCV and the peak power density of a cell with a 20 μm thick BCNO electrolyte were 0.950 V and 315 mW/cm2, respectively. With H2 fuel as a comparison, the values are correspondingly 0.951 V and 335 mW/cm2. © 2007 Elsevier B.V. All rights reserved.
Standard no: Journal of Power Sources, 2007, v. 170 n. 1, p. 38-41
Appears in Collections:Department of Anatomy

Files in This Item:
Click on the URI links for accessing contents.

Items in HannanDL are protected by copyright, with all rights reserved, unless otherwise indicated.